120kg Large ozone generator for flue gas denitrification

Description

120kg Large ozone generator for flue gas denitrification

Ozonefac large ozone generator adopts double gap discharge technology, with low harmonic pollution and energy consumption, high ozone concentration, compact structure and durability.

Ozone equipment components:

Air source inlet and distribution room;

The high-pressure distribution is installed in the distribution room at the inlet of the air source to provide electric energy for the ozone generation unit;

The generator can body, in which the ozone discharge body is installed;

Ozone outlet collection room;

The cooling water chamber is isolated from the generator tank body through sealed stainless steel pipes welded at both ends as the cooling water chamber.

Cooling inlet and outlet pipes;

The discharge body is installed in the stainless steel pipe;

The tank body is used as the grounding electrode;

The ozone generator operates at 7000v voltage and 800Hz frequency. The selection of this parameter is not only to provide optimized conditions for efficient ozone generation, but also due to safe and reliable design ideas. The discharge voltage of 7000v greatly reduces the power impact and ensures the longer service life of the discharge body. The generator is designed to work continuously for 24 hours, and each generator is pre installed with relevant instruments and valves. The ozonator is completely integrated. Before leaving the factory, pipes, valves, instruments and cables have been installed on the generator, and the whole system has been tested in the factory.

Introduction of ozone oxidation Denitration Process

Ozone oxidation denitration is to oxidize water-insoluble no and water-insoluble NO2 in flue gas into water-soluble N2O5, which is removed together with desulfurization and washing. There are as many as 65 specific removal reaction mechanisms, and the basic reactions that play a major role are as follows:

NO + O3=NO2 + O2

2NO2 + O3=N2O5 + O2

N2O5 +H2O=2HNO3

Hg0 + O3 =Hg+2 + O2

NOx is rapidly converted into nitric anhydride dissolved in aqueous solution, which is easily absorbed by water washing and reacts quickly with slurry, so as to irreversibly remove NOx;

In addition to NOx, some heavy metals, such as mercury and other heavy metal pollutants, are also oxidized by ozone at the same time. Oxidative denitration has a good mercury removal effect;

Air source ozone generator specification

Model	Ozone Output g/h	Power Kwh / kgO3	Air Flow Nm3/h	Cooling water m3/h	Size L×W×H(mm)
OZ-KG1.0	1000	14-18	29-39	3-4	1700×900×2000
OZ-KG2.0	2000		52-77	6-8	2400×900×2000
OZ-KG3.0	3000		77-115	9-12	2800×900×2000
OZ-KG4.0	4000		105-155	12-16	2800×900×2000
OZ-KG5.0	5000		130-195	15-20	2400×3000×2000
OZ-KG6.0	6000		155-230	18-24	2400×3000×2000
OZ-KG8.0	8000		205-310	24-32	3600×3000×2000
OZ-KG10.0	10000		260-390	30-40	3600×3200×2000
OZ-KG15.0	15000		390-580	45-60	3600×3400×2000
OZ-KG20.0	20000		515-775	60-80	6000×3200×2200
OZ-KG25.0	25000		645-970	75-100	6000×3400×2200
OZ-KG30.0	30000		775-1160	90-120	6000×3600×2200
OZ-KG40.0	40000		1030-1550	120-160	7200×4000×2200
OZ-KG50.0	50000		1290-1935	150-200	7200×4000×2200

Oxygen source ozone generator specification

Model	Ozone Output g/h	Power Kwh / kgO3	Air Flow Nm3/h	Cooling water m3/h	Size L×W×H(mm)
OZ-KG1.0	1000	7-10	7-10	1.5-2	1700×900×2000
OZ-KG2.0	2000		14-20	3-4	2400×900×2000
OZ-KG3.0	3000		20-29	5-6	2800×900×2000
OZ-KG4.0	4000		27-39	6-8	2800×900×2000
OZ-KG5.0	5000		34-49	8-10	2400×3000×2000
OZ-KG6.0	6000		41-59	9-12	2400×3000×2000
OZ-KG8.0	8000		54-78	12-16	3600×3000×2000
OZ-KG10.0	10000		67-98	15-20	3600×3200×2000
OZ-KG15.0	15000		100-145	25-30	3600×3400×2000
OZ-KG20.0	20000		134-195	30-40	6000×3200×2200
OZ-KG30.0	30000		200-295	50-60	6000×3600×2200
OZ-KG40.0	40000		267-390	60-80	7200×4000×2200
OZ-KG50.0	50000		335-490	80-100	7200×4000×2200
OZ-KG60.0	60000		400-585	100-120	8400×4200×2200
OZ-KG80.0	80000		535-780	130-160	8400×4200×2200
OZ-KG100.0	100000		667-975	150-200	8400×4200×2200
OZ-KG120.0	120000		811-1000	180-240	8400×4200×2200